5 open source boards using the ATSAM3X8EA-AU
Real designs built with the ATSAM3X8EA-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
ArduinoDueClone
digibird1
160 × 100 mm75 parts2LNo license14Microchip SAM
OMower
vasimv
229 × 157 mm413 parts4LGPL-3.010AVR/Arduino
Arduino-Due mod for-GPIO-compatible-Raspberry-Pi
radioelf
78.3 × 43.3 mm109 parts2LNo license1Microchip SAM
Chademo hardware
larsrengersen
100 × 107.8 mm129 parts4LMIT0Microchip SAM
Atmel sam3x8
JGilcreast
137.5 × 58.5 mm99 parts2LNo license0
How designs wire the ATSAM3X8EA-AU
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATSAM3X8EA-AU connects to, and the resistors, capacitors and other passives placed on it.
- The VDDCORE pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDDIO pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDDPLL pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The XOUT pin has a capacitor to GND on 5 of 5 designs, most often 22 pF (then 18 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDCOREpin 10, 45, 61, 104, 124 | Connected to: VDDOUT 100% |
|
| VDDIOpin 11, 62, 105, 125 | Connected to: 3.3V 100% |
|
| GNDpin 12, 58, 106, 126 | Connected to: GND 100% | — |
| PD0pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| PD1pin 14 | Connected to: Not connected 60% · a signal 40% | — |
| PD3pin 16 | Connected to: Not connected 60% · a signal 40% | — |
| PD4pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| PD6pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| PD8pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| PD9pin 22 | Connected to: Not connected 60% · a signal 40% | — |
| PA5pin 25 | Connected to: Not connected 80% · a signal 20% | — |
| PD10pin 32 | Connected to: Not connected 60% · a signal 40% | — |
| GNDPLLpin 33 | Connected to: GND 100% | — |
| VDDPLLpin 34 | Connected to: VDDPLL 60% · a signal 40% |
|
| XOUTpin 35 | Connected to: Signal 100% |
|
| XINpin 36 | Connected to: Signal 100% |
|
| DHSDPpin 37 | Connected to: A connector 80% |
|
| DHSDMpin 38 | Connected to: A connector 80% |
|
| VBUSpin 39 | Connected to: A connector 40% · VBUS 40% |
|
| VBGpin 40 | Connected to: Signal 100% |
|
| VDDUTMIpin 41 | Connected to: VDDOUTMI 80% · a signal 20% |
|
| DFSDPpin 42 | Connected to: Signal 100% |
|
| DFSDMpin 43 | Connected to: Signal 100% |
|
| GNDUTMIpin 44 | Connected to: GND 100% | — |
| JTAGSELpin 46 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| NRSTBpin 47 | Connected to: A connector 40% |
|
| XIN32pin 48 | Connected to: Signal 100% |
|
| XOUT32pin 49 | Connected to: Signal 100% |
|
| SHDNpin 50 | Connected to: Not connected 100% | — |
| TSTpin 51 | Connected to: Signal 80% · not connected 20% |
|
| VDDBUpin 52 | Connected to: 3.3V 80% · a signal 20% |
|
| FWUPpin 53 | Connected to: Signal 100% |
|
| GNDBUpin 54 | Connected to: GND 100% | — |
| PC1pin 55 | Connected to: Not connected 60% · a signal 40% | — |
| VDDOUTpin 56 | Connected to: VDDOUT 100% |
|
| VDDINpin 57 | Connected to: 3.3V 100% |
|
| PC2pin 59 | Connected to: Not connected 60% · a signal 40% | — |
| PC3pin 60 | Connected to: Not connected 60% · a signal 40% | — |
| PC5pin 63 | Connected to: Not connected 60% · a signal 40% | — |
| PC6pin 64 | Connected to: Not connected 60% · a signal 40% | — |
94 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ArduinoDueClone by digibird1, OMower by vasimv, Arduino-Due mod for-GPIO-compatible-Raspberry-Pi by radioelf and Atmel sam3x8 by JGilcreast.
The ATSAM3X8EA-AU in open source designs
The gallery holds 5 open source boards using the ATSAM3X8EA-AU from 5 GitHub repositories; a typical one measures about 137.5 × 100 mm and carries around 109 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is ArduinoDueClone by digibird1.
Microcontrollers on boards using the ATSAM3X8EA-AU
What boards using the ATSAM3X8EA-AU are built for
ATSAM3X8EA-AU: common questions
Where can I find a ATSAM3X8EA-AU reference design?
Each of the 5 boards on this page is a real design using the ATSAM3X8EA-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATSAM3X8EA-AU VDDCORE pin?
The VDDCORE pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATSAM3X8EA-AU.
What decoupling capacitors do designs use on the ATSAM3X8EA-AU VDDIO pin?
The VDDIO pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATSAM3X8EA-AU.
What decoupling capacitors do designs use on the ATSAM3X8EA-AU VDDPLL pin?
The VDDPLL pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATSAM3X8EA-AU.
Which microcontrollers do boards using the ATSAM3X8EA-AU use?
Most are built on Microchip SAM (4) and AVR/Arduino (1).
How big is a typical board using the ATSAM3X8EA-AU?
The median is 137.5 × 100 mm, and 60% are two-layer designs.
What is the most popular open source board using the ATSAM3X8EA-AU?
By GitHub stars, ArduinoDueClone by digibird1, with 14 stars.
Can I simulate one of these boards using the ATSAM3X8EA-AU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.