6 open source boards using the ATtiny45-20P

Real designs built with the ATtiny45-20P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the ATtiny45-20P

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATtiny45-20P connects to, and the resistors, capacitors and other passives placed on it.

  • The AREF/PB0 pin has a pull-up to 5V on 2 of 5 designs, most often 220 Ω (then 4.7 kΩ).
  • The AREF/PB0 pin has a series resistor on 2 of 5 designs, most often 1 kΩ (then 100 Ω).
  • The PB1 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
  • The PB2 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
GNDpin 4Connected to: GND 100%
AREF/PB0pin 5Connected to: Signal 100%
  • Pull-up to 5V on 40% · 220 Ω (1), 4.7 kΩ (1)
  • Series resistor on 40% · 1 kΩ (1), 100 Ω (1)
PB1pin 6Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 1 kΩ (1)
PB2pin 7Connected to: Signal 100%
  • Series resistor on 40% · 1 kΩ (1)
VCCpin 8Connected to: 5V 100%
  • Decoupling capacitor on 40% · 100 nF (2), 10 µF (1), 1 mF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MIDI to CV by PancakeLegend, Soldering-Sponge-Automatic-Water-Dispenser by EECSB, KIT by George-Emad31 and ATtiny45-Motor driver and-Led-Matrix-3-3 by Mohamed-Tarek-Marzouk.

The ATtiny45-20P in open source designs

The gallery holds 6 open source boards using the ATtiny45-20P from 5 GitHub repositories; a typical one measures about 60.3 × 51.1 mm and carries around 22 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MIDI to CV by PancakeLegend.

Microcontrollers on boards using the ATtiny45-20P

What boards using the ATtiny45-20P are built for

ATtiny45-20P: common questions

Where can I find a ATtiny45-20P reference design?

Each of the 6 boards on this page is a real design using the ATtiny45-20P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ATtiny45-20P AREF/PB0 pin?

The AREF/PB0 pin has a pull-up to 5V on 2 of 5 designs, most often 220 Ω (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the ATtiny45-20P.

What resistor goes on the ATtiny45-20P PB1 pin?

The PB1 pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the ATtiny45-20P.

What resistor goes on the ATtiny45-20P PB2 pin?

The PB2 pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the ATtiny45-20P.

Which microcontrollers do boards using the ATtiny45-20P use?

Most are built on AVR/Arduino (5) and ESP32 (1).

How big is a typical board using the ATtiny45-20P?

The median is 60.3 × 51.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATtiny45-20P?

By GitHub stars, MIDI to CV by PancakeLegend, with 2 stars.

Can I simulate one of these boards using the ATtiny45-20P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part