10 open source boards using the AX5043

Real designs built with the AX5043, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the AX5043

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AX5043 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_ANA pins have a capacitor to GND on 5 of 5 designs, most often 10 nF (then 100 nF).
  • The ANTP pin has a inductor on 5 of 5 designs, most often 100 nH (then 22 nH).
  • The ANTN pin has a series capacitor on 5 of 5 designs, most often 4.3 pF (then 56 pF).
  • The ANTN pin has a inductor on 5 of 5 designs, most often 100 nH (then 22 nH).
GNDpin 0, 2, 6Connected to: GND 100%
VDD_ANApin 1, 7Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 nF (6), 100 nF (4)
ANTPpin 3Connected to: Signal 100%
  • Inductor on 100% · 100 nH (2), 22 nH (1), 150 nH (1)
  • Series capacitor on 80% · 4.3 pF (2), 56 pF (1), 10 pF (1)
  • Capacitor to GND on 60% · 10 pF (1), 15 pF (1)
ANTNpin 4Connected to: Signal 100%
  • Series capacitor on 100% · 4.3 pF (2), 56 pF (1), 10 pF (1)
  • Inductor on 100% · 100 nH (2), 22 nH (1), 150 nH (1)
  • Capacitor to GND on 40% · 10 pF (1)
ANTP1pin 5Connected to: Signal 100%
  • Series capacitor on 80% · 4.3 pF (2), 22 pF (1)
  • Inductor on 60% · 100 nH (2), 120 nH (1)
FILTpin 8Connected to: Not connected 80% · a signal 20%
L2pin 9Connected to: Signal 80% · not connected 20%
  • Inductor on 80% · 22 nH (1), 100 nH (1), 18 nH (1)
L1pin 10Connected to: Signal 80% · not connected 20%
  • Inductor on 80% · 22 nH (1), 100 nH (1), 18 nH (1)
SYSCLKpin 13Connected to: Not connected 80% · a signal 20%
NCpin 18, 22, 24Connected to: Not connected 100%
VDD_IOpin 23Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 100% · 10 nF (3), 22 µF (3), 100 nF (1)
GPADC1pin 25Connected to: GND 60% · a signal 40%
GPADC2pin 26Connected to: GND 60% · a signal 40%
CLK16Npin 27Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 60% · 1 nF (3)
  • Series resistor on 40% · 1 kΩ (2)
CLK16Ppin 28Connected to: Signal 100%
  • Series capacitor on 80% · 1 nF (2), 10 pF (2)
  • Series resistor on 40% · 1 kΩ (2)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ax chip by richardeoin, DigitalTxRxRPi by BrandenburgTech, AX5043 Booster for Hercules Launchpad by AMSAT-NA and PacSatFSKBoard by AMSAT-NA.

The AX5043 in open source designs

The gallery holds 10 open source boards using the AX5043 from 5 GitHub repositories; a typical one measures about 91.1 × 91 mm and carries around 281 components.

80% use four copper layers or more, and 0% carry an open source license.

The most starred is Ax chip by richardeoin.

Microcontrollers on boards using the AX5043

What boards using the AX5043 are built for

AX5043: common questions

Where can I find a AX5043 reference design?

Each of the 10 boards on this page is a real design using the AX5043. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the AX5043 VDD_ANA pin connected?

The VDD_ANA pins have a capacitor to GND on 5 of 5 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the AX5043.

How is the AX5043 ANTP pin connected?

The ANTP pin has a inductor on 5 of 5 designs, most often 100 nH (then 22 nH). Counted from the KiCad layouts of 5 open source designs using the AX5043.

How is the AX5043 ANTN pin connected?

The ANTN pin has a series capacitor on 5 of 5 designs, most often 4.3 pF (then 56 pF). Counted from the KiCad layouts of 5 open source designs using the AX5043.

What parts are used alongside the AX5043?

The MAX31331TETB+, MAX31725, MMZ09312BT1 and STWD100NYWY3F appear in the most repositories here.

Which microcontrollers do boards using the AX5043 use?

Most are built on NXP (1) and STM32 (1).

How big is a typical board using the AX5043?

The median is 91.1 × 91 mm, and 20% are two-layer designs.

What is the most popular open source board using the AX5043?

By GitHub stars, Ax chip by richardeoin, with 49 stars.

Can I simulate one of these boards using the AX5043 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part