8 open source boards using the B0505MT-1WR4
Real designs built with the B0505MT-1WR4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Impeller18
buglalis
236.1 × 156.9 mm750 parts4LNo license0AVR/Arduino
AMS SLAVE TEST
HKUST-Red-Bird-Racing-EVRT
68 × 110 mm191 parts2LNo license0AVR/Arduino
AMS slave
HKUST-Red-Bird-Racing-EVRT
68 × 110 mm189 parts2LNo license0Io
zapta
90 × 88.4 mm47 parts2LNo license1AVR/Arduino
BDUCU
HKUST-Red-Bird-Racing-EVRT
140 × 60 mm169 parts2LNo license0AVR/Arduino
VCU V3.3
HKUST-Red-Bird-Racing-EVRT
114 × 95 mm145 parts2LNo license0AVR/Arduino
Front dash unit
HKUST-Red-Bird-Racing-EVRT
101 × 63.3 mm90 parts2LNo license0AVR/Arduino
TSALG ACCUM V2
HKUST-Red-Bird-Racing-EVRT
140 × 60 mm88 parts2LNo license0
The B0505MT-1WR4 in open source designs
The gallery holds 8 open source boards using the B0505MT-1WR4 from 3 GitHub repositories; a typical one measures about 107.5 × 91.7 mm and carries around 157 components.
88% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Io by zapta.
Parts used alongside the B0505MT-1WR4
Microcontrollers on boards using the B0505MT-1WR4
What boards using the B0505MT-1WR4 are built for
B0505MT-1WR4: common questions
Where can I find a B0505MT-1WR4 reference design?
Each of the 8 boards on this page is a real design using the B0505MT-1WR4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the B0505MT-1WR4 use?
Most are built on AVR/Arduino (6) and STM32 (1).
How big is a typical board using the B0505MT-1WR4?
The median is 107.5 × 91.7 mm, and 88% are two-layer designs.
What is the most popular open source board using the B0505MT-1WR4?
By GitHub stars, Io by zapta, with 1 stars.
Can I simulate one of these boards using the B0505MT-1WR4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.