2 open source boards using the Bluetooth_Module_(HC-06)

Real designs built with the Bluetooth_Module_(HC-06), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The Bluetooth_Module_(HC-06) in open source designs

The gallery holds 2 open source boards using the Bluetooth_Module_(HC-06) from 2 GitHub repositories; a typical one measures about 104.6 × 100.3 mm and carries around 65 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Main 3.1 by eesakiii.

Microcontrollers on boards using the Bluetooth_Module_(HC-06)

Bluetooth_Module_(HC-06): common questions

Where can I find a Bluetooth_Module_(HC-06) reference design?

Each of the 2 boards on this page is a real design using the Bluetooth_Module_(HC-06). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the Bluetooth_Module_(HC-06)?

The Adafruit_BNO055_STEMMA_QT, Bluetooth_Module_(HC-05), DEV-16771 and TB67H420FTG Dual/Single Motor Driver Carrier appear in the most repositories here.

Which microcontrollers do boards using the Bluetooth_Module_(HC-06) use?

Most are built on AVR/Arduino (2).

How big is a typical board using the Bluetooth_Module_(HC-06)?

The median is 104.6 × 100.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the Bluetooth_Module_(HC-06)?

By GitHub stars, Main 3.1 by eesakiii, with 0 stars.

Can I simulate one of these boards using the Bluetooth_Module_(HC-06) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part