2 open source boards using the BQ77915-08
Real designs built with the BQ77915-08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Batt Rev20
curtisseizert
112 × 100 mm53 parts2LMIT35
Batt Rev21
120 × 100 mm53 parts2LNo license42
The BQ77915-08 in open source designs
The gallery holds 2 open source boards using the BQ77915-08 from 2 GitHub repositories; a typical one measures about 116 × 100 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Batt Rev21 by curtisseizert.
What boards using the BQ77915-08 are built for
BQ77915-08: common questions
Where can I find a BQ77915-08 reference design?
Each of the 2 boards on this page is a real design using the BQ77915-08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the BQ77915-08?
The median is 116 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the BQ77915-08?
By GitHub stars, Batt Rev21 by curtisseizert, with 42 stars.
Can I simulate one of these boards using the BQ77915-08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.