3 open source boards using the BUF802IRGTR
Real designs built with the BUF802IRGTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kActive Scope Probe
hwidvorakinfo
70 × 20 mm55 parts4LNo license21FPGA
SIG COND
Han-ZenX
122.5 × 103.5 mm817 parts6LCustom license1
The BUF802IRGTR in open source designs
The gallery holds 3 open source boards using the BUF802IRGTR from 3 GitHub repositories; a typical one measures about 122.5 × 103.5 mm and carries around 817 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Thunderscope Rev5.3 by EEVengers.
Parts used alongside the BUF802IRGTR
Microcontrollers on boards using the BUF802IRGTR
BUF802IRGTR: common questions
Where can I find a BUF802IRGTR reference design?
Each of the 3 boards on this page is a real design using the BUF802IRGTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BUF802IRGTR?
The ADA4930-1YCPZ-R7, FIN1019MTCX, HMCAD1520, LM27761DSGR and LMH6518SQX/NOPB appear in the most repositories here.
Which microcontrollers do boards using the BUF802IRGTR use?
Most are built on FPGA (2).
How big is a typical board using the BUF802IRGTR?
The median is 122.5 × 103.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the BUF802IRGTR?
By GitHub stars, Thunderscope Rev5.3 by EEVengers, with 1,336 stars.
Can I simulate one of these boards using the BUF802IRGTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.