7 open source boards using the LM27761DSGR
Real designs built with the LM27761DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
SIG COND
Han-ZenX
122.5 × 103.5 mm817 parts6LCustom license1RP2040/RP2350
Ephys test board
open-ephys
150 × 120 mm542 parts4LCustom license1STM32
Smu main
PaulBichl
160 × 100 mm240 parts4LNo license1RP2040/RP2350
EIT-Multiplexer
ErenErenel
76.6 × 79.4 mm49 parts2LCERN-OHL-S-2.01Fiber Transmitter Module
EIGSEP
60.1 × 45.2 mm153 parts4LNo license0Rfof ftx
liuweiseu
60.1 × 45.2 mm153 parts4LCERN-OHL-S-2.00
How designs wire the LM27761DSGR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM27761DSGR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF).
- The CPOUT pin has a capacitor to GND on 7 of 7 designs, most often 4.7 µF (then 10 µF).
- The VFB pin has a resistor to GND on 7 of 7 designs, most often 90.9 kΩ (then 200 kΩ).
- The C1- pin has a series capacitor on 7 of 7 designs, most often 1 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5.3V 86% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| CPOUTpin 3 | Connected to: Signal 100% |
|
| VOUTpin 4 | Connected to: -5V 71% |
|
| VFBpin 5 | Connected to: Signal 100% |
|
| C1-pin 7 | Connected to: Signal 100% |
|
| C1+pin 8 | Connected to: Signal 100% |
|
| PADpin 9 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Thunderscope Rev5.3 by EEVengers, EIT-Multiplexer-PCB by ErenErenel, SIG COND by Han-ZenX and Ephys test board by open-ephys.
The LM27761DSGR in open source designs
The gallery holds 7 open source boards using the LM27761DSGR from 7 GitHub repositories; a typical one measures about 122.5 × 100 mm and carries around 240 components.
86% use four copper layers or more, and 43% carry an open source license.
The most starred is Thunderscope Rev5.3 by EEVengers.
Parts used alongside the LM27761DSGR
Microcontrollers on boards using the LM27761DSGR
What boards using the LM27761DSGR are built for
LM27761DSGR: common questions
Where can I find a LM27761DSGR reference design?
Each of the 7 boards on this page is a real design using the LM27761DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM27761DSGR VIN pin?
The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the LM27761DSGR.
How is the LM27761DSGR CPOUT pin connected?
The CPOUT pin has a capacitor to GND on 7 of 7 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the LM27761DSGR.
What resistor goes on the LM27761DSGR VFB pin?
The VFB pin has a resistor to GND on 7 of 7 designs, most often 90.9 kΩ (then 200 kΩ). Counted from the KiCad layouts of 7 open source designs using the LM27761DSGR.
What parts are used alongside the LM27761DSGR?
The AD8363ACPZ-R7, ADA4930-1YCPZ-R7, BUF802IRGTR, CAT5171TBI-50GT3 and F1958NBGK appear in the most repositories here.
Which microcontrollers do boards using the LM27761DSGR use?
Most are built on FPGA (2), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the LM27761DSGR?
The median is 122.5 × 100 mm, and 14% are two-layer designs.
What is the most popular open source board using the LM27761DSGR?
By GitHub stars, Thunderscope Rev5.3 by EEVengers, with 1,336 stars.
Can I simulate one of these boards using the LM27761DSGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.