5 open source boards using the C14289
Real designs built with the C14289, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RISC-V
EasyTester RevE
kanengomibako
45 × 35 mm60 parts2LUnlicense4STM32
FEDEVEL-Mixed-Signal
rcardenes
60 × 75 mm110 parts4LNo license2RP2040/RP2350
Rp2040 audioboard
lzptr
65 × 75 mm115 parts4LMIT0EEE3088F HAT
rb-jones
96 × 70 mm68 parts2LCC-BY-4.00AVR/Arduino
Arduino dolly
hollop90
26.8 × 53 mm37 parts4LNo license0
How designs wire the C14289
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C14289 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VINpin 2 | Connected to: 5V 60% · a signal 40% |
|
| VOUTpin 3 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EasyTester RevE by kanengomibako, FEDEVEL-Mixed-Signal-PCB by rcardenes, Arduino dolly by hollop90 and Rp2040 audioboard by lzptr.
The C14289 in open source designs
The gallery holds 5 open source boards using the C14289 from 5 GitHub repositories; a typical one measures about 60 × 70 mm and carries around 68 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is EasyTester RevE by kanengomibako.
Parts used alongside the C14289
Microcontrollers on boards using the C14289
What boards using the C14289 are built for
C14289: common questions
Where can I find a C14289 reference design?
Each of the 5 boards on this page is a real design using the C14289. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C14289 VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 22 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the C14289.
What decoupling capacitors do designs use on the C14289 VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the C14289.
What parts are used alongside the C14289?
The C206494, C2872391 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the C14289 use?
Most are built on AVR/Arduino (1), RISC-V (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the C14289?
The median is 60 × 70 mm, and 40% are two-layer designs.
What is the most popular open source board using the C14289?
By GitHub stars, EasyTester RevE by kanengomibako, with 4 stars.
Can I simulate one of these boards using the C14289 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.