3 open source boards using the C779278

Real designs built with the C779278, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The C779278 in open source designs

The gallery holds 3 open source boards using the C779278 from 3 GitHub repositories; a typical one measures about 55.3 × 50 mm and carries around 113 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is NP1 FCC by nikphillydev.

Microcontrollers on boards using the C779278

What boards using the C779278 are built for

C779278: common questions

Where can I find a C779278 reference design?

Each of the 3 boards on this page is a real design using the C779278. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the C779278 use?

Most are built on STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the C779278?

The median is 55.3 × 50 mm, and 0% are two-layer designs.

What is the most popular open source board using the C779278?

By GitHub stars, NP1 FCC by nikphillydev, with 3 stars.

Can I simulate one of these boards using the C779278 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part