5 open source boards using the CA-IS3092W

Real designs built with the CA-IS3092W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The CA-IS3092W in open source designs

The gallery holds 5 open source boards using the CA-IS3092W from 2 GitHub repositories; a typical one measures about 130 × 100 mm and carries around 84 components.

100% use four copper layers or more, and 80% carry an open source license.

The most starred is Bornier by bornier-dev.

Microcontrollers on boards using the CA-IS3092W

What boards using the CA-IS3092W are built for

CA-IS3092W: common questions

Where can I find a CA-IS3092W reference design?

Each of the 5 boards on this page is a real design using the CA-IS3092W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CA-IS3092W use?

Most are built on ESP32 (4) and STM32 (1).

How big is a typical board using the CA-IS3092W?

The median is 130 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the CA-IS3092W?

By GitHub stars, Bornier by bornier-dev, with 0 stars.

Can I simulate one of these boards using the CA-IS3092W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part