13 open source boards using the CAT24C32WI
Real designs built with the CAT24C32WI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA2019-07-06 11:52:16 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031
STM32UPS-2 PowerSupply HW
ECOM-Engineering
65 × 56.5 mm59 parts2LCustom license2
FPGA2019-07-06 12:26:53 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-06 12:29:23 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 17:06:08 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 17:06:09 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 17:15:58 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 17:33:00 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 17:33:20 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 18:07:42 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 18:08:38 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGA2019-07-07 18:25:46 fpga hat
65 × 56.5 mm87 parts4LApache-2.031
FPGAFpga hat
65 × 56.5 mm87 parts4LApache-2.031
The CAT24C32WI in open source designs
The gallery holds 13 open source boards using the CAT24C32WI from 2 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 87 components.
92% use four copper layers or more, and 92% carry an open source license.
The most starred is 2019-07-07 18:08:38 fpga hat by Wren6991.
What boards using the CAT24C32WI are built for
CAT24C32WI: common questions
Where can I find a CAT24C32WI reference design?
Each of the 13 boards on this page is a real design using the CAT24C32WI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CAT24C32WI use?
Most are built on FPGA (12) and STM32 (1).
How big is a typical board using the CAT24C32WI?
The median is 65 × 56.5 mm, and 8% are two-layer designs.
What is the most popular open source board using the CAT24C32WI?
By GitHub stars, 2019-07-07 18:08:38 fpga hat by Wren6991, with 31 stars.
Can I simulate one of these boards using the CAT24C32WI before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.