2 open source boards using the CC1312R1F3RGZR

Real designs built with the CC1312R1F3RGZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The CC1312R1F3RGZR in open source designs

The gallery holds 2 open source boards using the CC1312R1F3RGZR from 2 GitHub repositories; a typical one measures about 120 × 54.5 mm and carries around 195 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Expansion board v4 by naizhao.

Microcontrollers on boards using the CC1312R1F3RGZR

What boards using the CC1312R1F3RGZR are built for

CC1312R1F3RGZR: common questions

Where can I find a CC1312R1F3RGZR reference design?

Each of the 2 boards on this page is a real design using the CC1312R1F3RGZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CC1312R1F3RGZR use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the CC1312R1F3RGZR?

The median is 120 × 54.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the CC1312R1F3RGZR?

By GitHub stars, Expansion board v4 by naizhao, with 11 stars.

Can I simulate one of these boards using the CC1312R1F3RGZR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part