3 open source boards using the CC2500_MOD6

Real designs built with the CC2500_MOD6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The CC2500_MOD6 in open source designs

The gallery holds 3 open source boards using the CC2500_MOD6 from 1 GitHub repository; a typical one measures about 27.5 × 14.5 mm and carries around 33 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is FRReceiverTiny by shaise.

Microcontrollers on boards using the CC2500_MOD6

AVR/Arduino 3

What boards using the CC2500_MOD6 are built for

USB & debug tools 3

CC2500_MOD6: common questions

Where can I find a CC2500_MOD6 reference design?

Each of the 3 boards on this page is a real design using the CC2500_MOD6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CC2500_MOD6 use?

Most are built on AVR/Arduino (3).

How big is a typical board using the CC2500_MOD6?

The median is 27.5 × 14.5 mm, and 33% are two-layer designs.

What is the most popular open source board using the CC2500_MOD6?

By GitHub stars, FRReceiverTiny by shaise, with 13 stars.

Can I simulate one of these boards using the CC2500_MOD6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.