3 open source boards using the CD2003GB_GP

Real designs built with the CD2003GB_GP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The CD2003GB_GP in open source designs

The gallery holds 3 open source boards using the CD2003GB_GP from 3 GitHub repositories; a typical one measures about 97.1 × 97 mm and carries around 86 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is ADX by WB2CBA.

Parts used alongside the CD2003GB_GP

Microcontrollers on boards using the CD2003GB_GP

What boards using the CD2003GB_GP are built for

CD2003GB_GP: common questions

Where can I find a CD2003GB_GP reference design?

Each of the 3 boards on this page is a real design using the CD2003GB_GP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CD2003GB_GP?

The 74ACT244, SI535X_Module and uSDX_LPF_BAND_MODULE appear in the most repositories here.

Which microcontrollers do boards using the CD2003GB_GP use?

Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the CD2003GB_GP?

The median is 97.1 × 97 mm, and 100% are two-layer designs.

What is the most popular open source board using the CD2003GB_GP?

By GitHub stars, ADX by WB2CBA, with 133 stars.

Can I simulate one of these boards using the CD2003GB_GP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part