7 open source boards using the CD4051BM96
Real designs built with the CD4051BM96, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
ICE40hxk4 dev board
smartbench
67 × 157 mm379 parts4LNo license2ESP32
Tubender
smvumbaco
352.3 × 159.3 mm252 parts4LNo license2RP2040/RP2350
Mainboard
palthedog
280 × 150 mm106 parts4LNo license1PCB Layout MOSFET
Chillkroetchen
90.5 × 64.5 mm89 parts4LNo license1ESP32
Lfp
maxakash
216 × 146 mm831 parts2LNo license0Multiplex MOSFET
Chillkroetchen
45.2 × 31.8 mm37 parts4LNo license1- schematic only · 72 parts
BMS EXTERNAL V1RA
Stefanhg
72 parts4LNo license0
How designs wire the CD4051BM96
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CD4051BM96 connects to, and the resistors, capacitors and other passives placed on it.
- The VEE pin is tied to GND on 5 of 5 designs.
- The INH pin is tied to GND on 4 of 5 designs.
- The CH_4_IN/OUT pin has a series resistor on 3 of 5 designs, most often 100 Ω (then 1 kΩ).
- The CH_6_IN/OUT pin has a series resistor on 3 of 5 designs, most often 100 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CH_4_IN/OUTpin 1 | Connected to: A connector 40% · GND 20% |
|
| CH_6_IN/OUTpin 2 | Connected to: A connector 40% · GND 20% |
|
| CH_7_IN/OUTpin 4 | Connected to: A connector 40% · GND 20% |
|
| CH_5_IN/OUTpin 5 | Connected to: A connector 40% · GND 20% |
|
| INHpin 6 | Connected to: GND 80% · a signal 20% | — |
| VEEpin 7 | Connected to: GND 100% | — |
| VSSpin 8 | Connected to: GND 100% | — |
| Cpin 9 | Connected to: Signal 100% |
|
| Bpin 10 | Connected to: Signal 100% |
|
| Apin 11 | Connected to: Signal 100% |
|
| CH_3_IN/OUTpin 12 | Connected to: A connector 40% · GND 20% |
|
| CH_0_IN/OUTpin 13 | Connected to: A connector 60% |
|
| CH_1_IN/OUTpin 14 | Connected to: A connector 60% |
|
| CH_2_IN/OUTpin 15 | Connected to: A connector 60% |
|
| VDDpin 16 | Connected to: 3.3V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICE40hxk4 dev board by smartbench, Tubender PCB by smvumbaco, Multiplex MOSFET by Chillkroetchen and Mainboard by palthedog.
The CD4051BM96 in open source designs
The gallery holds 7 open source boards using the CD4051BM96 from 6 GitHub repositories; a typical one measures about 153.3 × 148 mm and carries around 106 components.
86% use four copper layers or more, and 0% carry an open source license.
The most starred is ICE40hxk4 dev board by smartbench.
Parts used alongside the CD4051BM96
Microcontrollers on boards using the CD4051BM96
What boards using the CD4051BM96 are built for
CD4051BM96: common questions
Where can I find a CD4051BM96 reference design?
Each of the 7 boards on this page is a real design using the CD4051BM96. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CD4051BM96 VEE pin connected?
The VEE pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4051BM96.
How is the CD4051BM96 INH pin connected?
The INH pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the CD4051BM96.
What resistor goes on the CD4051BM96 CH_4_IN/OUT pin?
The CH_4_IN/OUT pin has a series resistor on 3 of 5 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the CD4051BM96.
Which microcontrollers do boards using the CD4051BM96 use?
Most are built on ESP32 (2), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the CD4051BM96?
The median is 153.3 × 148 mm, and 14% are two-layer designs.
What is the most popular open source board using the CD4051BM96?
By GitHub stars, ICE40hxk4 dev board by smartbench, with 2 stars.
Can I simulate one of these boards using the CD4051BM96 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.