5 open source boards using the CD74HC4067

Real designs built with the CD74HC4067, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the CD74HC4067

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CD74HC4067 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
GNDpin 12Connected to: GND 100%
VCCpin 24Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 60% · 100 nF (4), 1 µF (1), 22 µF (1)

22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ips20 by gzweigle, ClaremontJN by ParadigmHyperloop, July23 by biofoundry and Controller-Electrical-Schematics by mk4-dd.

The CD74HC4067 in open source designs

The gallery holds 5 open source boards using the CD74HC4067 from 5 GitHub repositories; a typical one measures about 181.7 × 101.6 mm and carries around 126 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Ips20 by gzweigle.

Parts used alongside the CD74HC4067

Microcontrollers on boards using the CD74HC4067

What boards using the CD74HC4067 are built for

CD74HC4067: common questions

Where can I find a CD74HC4067 reference design?

Each of the 5 boards on this page is a real design using the CD74HC4067. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CD74HC4067 VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the CD74HC4067.

Which microcontrollers do boards using the CD74HC4067 use?

Most are built on NXP (2) and AVR/Arduino (1).

How big is a typical board using the CD74HC4067?

The median is 181.7 × 101.6 mm, and 80% are two-layer designs.

What is the most popular open source board using the CD74HC4067?

By GitHub stars, Ips20 by gzweigle, with 60 stars.

Can I simulate one of these boards using the CD74HC4067 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part