1 open source board using the CH32V006F8U6
Real designs built with the CH32V006F8U6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenServoCoreThe CH32V006F8U6 in open source designs
The gallery holds 1 open source boards using the CH32V006F8U6 from 1 GitHub repository; a typical one measures about 20.6 × 9.6 mm and carries around 26 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Osc sg90-v006 by OpenServoCore.
Microcontrollers on boards using the CH32V006F8U6
What boards using the CH32V006F8U6 are built for
CH32V006F8U6: common questions
Where can I find a CH32V006F8U6 reference design?
Each of the 1 boards on this page is a real design using the CH32V006F8U6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CH32V006F8U6 use?
Most are built on RISC-V (1).
How big is a typical board using the CH32V006F8U6?
The median is 20.6 × 9.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the CH32V006F8U6?
By GitHub stars, Osc sg90-v006 by OpenServoCore, with 34 stars.
Can I simulate one of these boards using the CH32V006F8U6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.