3 open source boards using the DCDC_12V_3V3
Real designs built with the DCDC_12V_3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
K2 v4 8L
dataxcash
120 × 46 mm42 parts8LAGPL-3.00- schematic only · 42 parts
Hw ic key
dataxcash
42 partsAGPL-3.00 STM32
K2 v4 8L.l4
dataxcash
120 × 46 mm42 parts8LAGPL-3.00
The DCDC_12V_3V3 in open source designs
The gallery holds 3 open source boards using the DCDC_12V_3V3 from 2 GitHub repositories; a typical one measures about 120 × 46 mm and carries around 42 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is K2 v4 8L.l4 by dataxcash.
Microcontrollers on boards using the DCDC_12V_3V3
DCDC_12V_3V3: common questions
Where can I find a DCDC_12V_3V3 reference design?
Each of the 3 boards on this page is a real design using the DCDC_12V_3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DCDC_12V_3V3 use?
Most are built on STM32 (2).
How big is a typical board using the DCDC_12V_3V3?
The median is 120 × 46 mm, and 0% are two-layer designs.
What is the most popular open source board using the DCDC_12V_3V3?
By GitHub stars, K2 v4 8L.l4 by dataxcash, with 0 stars.
Can I simulate one of these boards using the DCDC_12V_3V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.