1 open source board using the DF30FC-24DS-0.4V_82_
Real designs built with the DF30FC-24DS-0.4V_82_, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TobiasJaeggiThe DF30FC-24DS-0.4V_82_ in open source designs
The gallery holds 1 open source boards using the DF30FC-24DS-0.4V_82_ from 1 GitHub repository; a typical one measures about 60.6 × 100 mm and carries around 188 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Fpga mocap by TobiasJaeggi.
Microcontrollers on boards using the DF30FC-24DS-0.4V_82_
DF30FC-24DS-0.4V_82_: common questions
Where can I find a DF30FC-24DS-0.4V_82_ reference design?
Each of the 1 boards on this page is a real design using the DF30FC-24DS-0.4V_82_. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DF30FC-24DS-0.4V_82_ use?
Most are built on STM32 (1).
How big is a typical board using the DF30FC-24DS-0.4V_82_?
The median is 60.6 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the DF30FC-24DS-0.4V_82_?
By GitHub stars, Fpga mocap by TobiasJaeggi, with 1 stars.
Can I simulate one of these boards using the DF30FC-24DS-0.4V_82_ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.