3 open source boards using the DG412DQ
Real designs built with the DG412DQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGASitina 1 Sensor Board
CameraNexus
71.5 × 63.6 mm415 parts6LMIT73
FPGASitina 1 Sensor Board
novvoo
71.5 × 63.6 mm415 parts6LMIT2
Prj
52.1 × 40.6 mm84 parts4LMIT2
The DG412DQ in open source designs
The gallery holds 3 open source boards using the DG412DQ from 2 GitHub repositories; a typical one measures about 71.5 × 63.6 mm and carries around 415 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Sitina 1 Sensor Board by CameraNexus.
Parts used alongside the DG412DQ
Microcontrollers on boards using the DG412DQ
What boards using the DG412DQ are built for
DG412DQ: common questions
Where can I find a DG412DQ reference design?
Each of the 3 boards on this page is a real design using the DG412DQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DG412DQ?
The 74HC2G17GW, AD9990, ADA4800, DS1843D and IRLHS6376PBF appear in the most repositories here.
Which microcontrollers do boards using the DG412DQ use?
Most are built on FPGA (2).
How big is a typical board using the DG412DQ?
The median is 71.5 × 63.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the DG412DQ?
By GitHub stars, Sitina 1 Sensor Board by CameraNexus, with 73 stars.
Can I simulate one of these boards using the DG412DQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.