3 open source boards using the Display

Real designs built with the Display, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The Display in open source designs

The gallery holds 3 open source boards using the Display from 3 GitHub repositories; a typical one measures about 92 × 82.5 mm and carries around 46 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Trezor v1.1 by trezor.

Microcontrollers on boards using the Display

What boards using the Display are built for

Display: common questions

Where can I find a Display reference design?

Each of the 3 boards on this page is a real design using the Display. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Display use?

Most are built on ESP32 (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the Display?

The median is 92 × 82.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the Display?

By GitHub stars, Trezor v1.1 by trezor, with 224 stars.

Can I simulate one of these boards using the Display before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.