3 open source boards using the DS3231SN#T&R
Real designs built with the DS3231SN#T&R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Rabbit 2.0 body board (deck 2)
seralexeev
120.5 × 269.9 mm323 parts4LNo license1AVR/Arduino
Nixie Clock
PennyLekas
115 × 80 mm94 parts2LCERN-OHL-S-2.00ESP32
Esp32s3-ds3231-w5500
brili99
170 × 360 mm56 parts2LMIT0
The DS3231SN#T&R in open source designs
The gallery holds 3 open source boards using the DS3231SN#T&R from 3 GitHub repositories; a typical one measures about 120.5 × 269.9 mm and carries around 94 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Rabbit 2.0 body board (deck 2) by seralexeev.
Microcontrollers on boards using the DS3231SN#T&R
What boards using the DS3231SN#T&R are built for
DS3231SN#T&R: common questions
Where can I find a DS3231SN#T&R reference design?
Each of the 3 boards on this page is a real design using the DS3231SN#T&R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DS3231SN#T&R use?
Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).
How big is a typical board using the DS3231SN#T&R?
The median is 120.5 × 269.9 mm, and 67% are two-layer designs.
What is the most popular open source board using the DS3231SN#T&R?
By GitHub stars, Rabbit 2.0 body board (deck 2) by seralexeev, with 1 stars.
Can I simulate one of these boards using the DS3231SN#T&R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.