3 open source boards using the DZDH0401DW-7
Real designs built with the DZDH0401DW-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Rpi cm5io mini itx
sanctuary-systems-com
170 × 170 mm57 parts4LCERN-OHL-P-2.028Poweroid
Prismary
98 × 78.8 mm56 parts2LCC-BY-NC-4.02RP2040/RP2350
Debug board v1
proveskit
55.5 × 53.5 mm21 parts2LCERN-OHL-W-2.00
The DZDH0401DW-7 in open source designs
The gallery holds 3 open source boards using the DZDH0401DW-7 from 3 GitHub repositories; a typical one measures about 98 × 78.8 mm and carries around 56 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Rpi cm5io mini itx by sanctuary-systems-com.
Microcontrollers on boards using the DZDH0401DW-7
What boards using the DZDH0401DW-7 are built for
DZDH0401DW-7: common questions
Where can I find a DZDH0401DW-7 reference design?
Each of the 3 boards on this page is a real design using the DZDH0401DW-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DZDH0401DW-7 use?
Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the DZDH0401DW-7?
The median is 98 × 78.8 mm, and 67% are two-layer designs.
What is the most popular open source board using the DZDH0401DW-7?
By GitHub stars, Rpi cm5io mini itx by sanctuary-systems-com, with 28 stars.
Can I simulate one of these boards using the DZDH0401DW-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.