3 open source boards using the E18-MS1-PCB
Real designs built with the E18-MS1-PCB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoTionO2-ZigBee
kvazimoda24
72 × 45 mm44 parts2LNo license10
YNXT-WM01
RJSDevel
87.6 × 35.6 mm39 parts2LGPL-3.09
Zigbee desk lamp
Czubixx
59.5 × 27 mm18 parts2LNo license0
The E18-MS1-PCB in open source designs
The gallery holds 3 open source boards using the E18-MS1-PCB from 3 GitHub repositories; a typical one measures about 72 × 35.6 mm and carries around 39 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is TionO2-ZigBee by kvazimoda24.
Parts used alongside the E18-MS1-PCB
Microcontrollers on boards using the E18-MS1-PCB
What boards using the E18-MS1-PCB are built for
E18-MS1-PCB: common questions
Where can I find a E18-MS1-PCB reference design?
Each of the 3 boards on this page is a real design using the E18-MS1-PCB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the E18-MS1-PCB use?
Most are built on AVR/Arduino (1).
How big is a typical board using the E18-MS1-PCB?
The median is 72 × 35.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the E18-MS1-PCB?
By GitHub stars, TionO2-ZigBee by kvazimoda24, with 10 stars.
Can I simulate one of these boards using the E18-MS1-PCB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.