2 open source boards using the ECP5_EVN_PCIe

Real designs built with the ECP5_EVN_PCIe, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ECP5_EVN_PCIe in open source designs

The gallery holds 2 open source boards using the ECP5_EVN_PCIe from 2 GitHub repositories; a typical one measures about 114.9 × 85.8 mm and carries around 49 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is ECP5-PCIe by ECP5-PCIe.

Parts used alongside the ECP5_EVN_PCIe

Microcontrollers on boards using the ECP5_EVN_PCIe

FPGA 2

ECP5_EVN_PCIe: common questions

Where can I find a ECP5_EVN_PCIe reference design?

Each of the 2 boards on this page is a real design using the ECP5_EVN_PCIe. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ECP5_EVN_PCIe use?

Most are built on FPGA (2).

How big is a typical board using the ECP5_EVN_PCIe?

The median is 114.9 × 85.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the ECP5_EVN_PCIe?

By GitHub stars, ECP5-PCIe by ECP5-PCIe, with 103 stars.

Can I simulate one of these boards using the ECP5_EVN_PCIe before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.