3 open source boards using the EPCS4

Real designs built with the EPCS4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The EPCS4 in open source designs

The gallery holds 3 open source boards using the EPCS4 from 3 GitHub repositories; a typical one measures about 150.4 × 120.4 mm and carries around 120 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Zx sizif xxs by UzixLS.

Microcontrollers on boards using the EPCS4

EPCS4: common questions

Where can I find a EPCS4 reference design?

Each of the 3 boards on this page is a real design using the EPCS4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the EPCS4?

The AMS1117-1.5, AMS1117-3.3, EP1C12Q240C8N, M51953BFP and MT48LC16M16A2TG appear in the most repositories here.

Which microcontrollers do boards using the EPCS4 use?

Most are built on WCH CH32/CH55x (1) and ESP8266 (1).

How big is a typical board using the EPCS4?

The median is 150.4 × 120.4 mm, and 33% are two-layer designs.

What is the most popular open source board using the EPCS4?

By GitHub stars, Zx sizif xxs by UzixLS, with 49 stars.

Can I simulate one of these boards using the EPCS4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part