3 open source boards using the ESP32-S3-FN8

Real designs built with the ESP32-S3-FN8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ESP32-S3-FN8 in open source designs

The gallery holds 3 open source boards using the ESP32-S3-FN8 from 3 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 93 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Extraice by elkel53930.

Parts used alongside the ESP32-S3-FN8

Microcontrollers on boards using the ESP32-S3-FN8

What boards using the ESP32-S3-FN8 are built for

ESP32-S3-FN8: common questions

Where can I find a ESP32-S3-FN8 reference design?

Each of the 3 boards on this page is a real design using the ESP32-S3-FN8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ESP32-S3-FN8 use?

Most are built on ESP32 (3).

How big is a typical board using the ESP32-S3-FN8?

The median is 80 × 80 mm, and 67% are two-layer designs.

What is the most popular open source board using the ESP32-S3-FN8?

By GitHub stars, Extraice by elkel53930, with 4 stars.

Can I simulate one of these boards using the ESP32-S3-FN8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part