11 open source boards using the LSM6DSR

Real designs built with the LSM6DSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LSM6DSR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LSM6DSR connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD_IO pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
  • The VDD pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
  • The OCS_AUX pin is left unconnected on 11 of 11 designs.
  • The SDO_AUX pin is left unconnected on 11 of 11 designs.
SDXpin 2Connected to: GND 73% · not connected 27%
SCXpin 3Connected to: GND 73% · not connected 27%
INT1pin 4Connected to: Not connected 73% · a signal 27%
VDD_IOpin 5Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (18), 1 µF (1)
GNDpin 6, 7Connected to: GND 100%
VDDpin 8Connected to: 3.3V 91%
  • Decoupling capacitor on 100% · 100 nF (18), 1 µF (1)
INT2pin 9Connected to: Not connected 82% · a signal 18%
OCS_AUXpin 10Connected to: Not connected 100%
SDO_AUXpin 11Connected to: Not connected 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Explorer by anyshake, IMUModule STM32 PCB by Kotakku, Extraice by elkel53930 and Raven1106 by EPSILON0-dev.

The LSM6DSR in open source designs

The gallery holds 11 open source boards using the LSM6DSR from 11 GitHub repositories; a typical one measures about 70 × 61 mm and carries around 90 components.

55% use four copper layers or more, and 36% carry an open source license.

The most starred is Explorer by anyshake.

Microcontrollers on boards using the LSM6DSR

LSM6DSR: common questions

Where can I find a LSM6DSR reference design?

Each of the 11 boards on this page is a real design using the LSM6DSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LSM6DSR VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the LSM6DSR.

What decoupling capacitors do designs use on the LSM6DSR VDD pin?

The VDD pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the LSM6DSR.

How is the LSM6DSR OCS_AUX pin connected?

The OCS_AUX pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the LSM6DSR.

What parts are used alongside the LSM6DSR?

The ADCS7476, BD63573NUV, DRV8837C, FT231XQ-R and LM74700QDBVRQ1 appear in the most repositories here.

Which microcontrollers do boards using the LSM6DSR use?

Most are built on ESP32 (5), STM32 (5) and RP2040/RP2350 (1).

How big is a typical board using the LSM6DSR?

The median is 70 × 61 mm, and 45% are two-layer designs.

What is the most popular open source board using the LSM6DSR?

By GitHub stars, Explorer by anyshake, with 98 stars.

Can I simulate one of these boards using the LSM6DSR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part