2 open source boards using the FSUSB42MX
Real designs built with the FSUSB42MX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Cm5 camera
CopperPilot
55 × 40 mm90 parts6LMIT11Raspberry Pi
Safeproject main r3
bugg-resources
57.3 × 109 mm141 parts4LCC-BY-NC-4.01
The FSUSB42MX in open source designs
The gallery holds 2 open source boards using the FSUSB42MX from 2 GitHub repositories; a typical one measures about 56.1 × 74.5 mm and carries around 116 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Cm5 camera by CopperPilot.
Microcontrollers on boards using the FSUSB42MX
FSUSB42MX: common questions
Where can I find a FSUSB42MX reference design?
Each of the 2 boards on this page is a real design using the FSUSB42MX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FSUSB42MX use?
Most are built on Raspberry Pi (2).
How big is a typical board using the FSUSB42MX?
The median is 56.1 × 74.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the FSUSB42MX?
By GitHub stars, Cm5 camera by CopperPilot, with 11 stars.
Can I simulate one of these boards using the FSUSB42MX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.