2 open source boards using the FT2232HQ-TRAY
Real designs built with the FT2232HQ-TRAY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Zynqinator
rkarl2
100 × 102 mm631 parts8LAGPL-3.01FPGA
ICEBreaker+++
gregdavill
56 × 37 mm104 parts4LNo license178
The FT2232HQ-TRAY in open source designs
The gallery holds 2 open source boards using the FT2232HQ-TRAY from 2 GitHub repositories; a typical one measures about 78 × 69.5 mm and carries around 368 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is ICEBreaker+++ by gregdavill.
Microcontrollers on boards using the FT2232HQ-TRAY
FT2232HQ-TRAY: common questions
Where can I find a FT2232HQ-TRAY reference design?
Each of the 2 boards on this page is a real design using the FT2232HQ-TRAY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FT2232HQ-TRAY use?
Most are built on FPGA (2).
How big is a typical board using the FT2232HQ-TRAY?
The median is 78 × 69.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the FT2232HQ-TRAY?
By GitHub stars, ICEBreaker+++ by gregdavill, with 178 stars.
Can I simulate one of these boards using the FT2232HQ-TRAY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.