2 open source boards using the FT232
Real designs built with the FT232, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
RD40 display V1
lhm0
120 × 120 mm32 parts2LCC-BY-NC-4.071Ioboard6
subatomicglue
213.4 × 44.5 mm82 partsNo license3
The FT232 in open source designs
The gallery holds 2 open source boards using the FT232 from 2 GitHub repositories; a typical one measures about 166.7 × 82.2 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is RD40 display V1 by lhm0.
Microcontrollers on boards using the FT232
What boards using the FT232 are built for
FT232: common questions
Where can I find a FT232 reference design?
Each of the 2 boards on this page is a real design using the FT232. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FT232 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the FT232?
The median is 166.7 × 82.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the FT232?
By GitHub stars, RD40 display V1 by lhm0, with 71 stars.
Can I simulate one of these boards using the FT232 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.