4 open source boards using the G313-06329-00
Real designs built with the G313-06329-00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
M2-smart iot module
antmicro
80.2 × 22.2 mm210 parts4LApache-2.030NXP
Tpu electricals
starbelt
43 × 43 mm210 parts8LMIT0AVR/Arduino
FlySensei Stack RPi
denjos007
90 × 65 mm89 parts4LNo license0AVR/Arduino
FlySensei Stack RPi
denjos007
90 × 65 mm45 parts4LNo license0
The G313-06329-00 in open source designs
The gallery holds 4 open source boards using the G313-06329-00 from 3 GitHub repositories; a typical one measures about 85.1 × 54 mm and carries around 150 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is M2-smart iot module by antmicro.
Microcontrollers on boards using the G313-06329-00
What boards using the G313-06329-00 are built for
G313-06329-00: common questions
Where can I find a G313-06329-00 reference design?
Each of the 4 boards on this page is a real design using the G313-06329-00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the G313-06329-00 use?
Most are built on AVR/Arduino (2), Nordic nRF (1) and NXP (1).
How big is a typical board using the G313-06329-00?
The median is 85.1 × 54 mm, and 0% are two-layer designs.
What is the most popular open source board using the G313-06329-00?
By GitHub stars, M2-smart iot module by antmicro, with 30 stars.
Can I simulate one of these boards using the G313-06329-00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.