6 open source boards using the GD25Q32CNIGR
Real designs built with the GD25Q32CNIGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Serpente
arturo182
24.8 × 22 mm20 parts2LCERN-OHL-1.235Microchip SAM
Dynossat edu obc
BHDynamics
42 × 42 mm52 parts4LCERN-OHL-1.214ESP32
ESP32 S3 CAM
HexSense-MIT
17.5 × 30.5 mm50 parts4LNo license1Microchip SAM
Serpente plug c
arturo182
24.3 × 22 mm19 parts2LCERN-OHL-1.235- schematic only · 52 partsESP32
ESP32 S3 CAM wifi
HexSense-MIT
52 partsNo license1 Microchip SAM
Serpente plug
arturo182
29.6 × 22 mm17 parts2LCERN-OHL-1.235
The GD25Q32CNIGR in open source designs
The gallery holds 6 open source boards using the GD25Q32CNIGR from 3 GitHub repositories; a typical one measures about 24.8 × 22 mm and carries around 35 components.
60% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Serpente by arturo182.
Microcontrollers on boards using the GD25Q32CNIGR
What boards using the GD25Q32CNIGR are built for
GD25Q32CNIGR: common questions
Where can I find a GD25Q32CNIGR reference design?
Each of the 6 boards on this page is a real design using the GD25Q32CNIGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GD25Q32CNIGR use?
Most are built on Microchip SAM (4) and ESP32 (2).
How big is a typical board using the GD25Q32CNIGR?
The median is 24.8 × 22 mm, and 60% are two-layer designs.
What is the most popular open source board using the GD25Q32CNIGR?
By GitHub stars, Serpente by arturo182, with 35 stars.
Can I simulate one of these boards using the GD25Q32CNIGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.