8 open source boards using the HD3SS3220RNHR
Real designs built with the HD3SS3220RNHR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Dongle pro
fcjr
26 × 98 mm99 parts4LApache-2.016ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02Base board
GeniePod
90 × 90 mm216 parts6LCERN-OHL-S-2.02CoolUsbHub
duykhanh09103
75 × 54.5 mm58 parts4LMIT2Robothardware
des256
190 × 130 mm364 parts4LNo license0ESP32
Magnetometer node mainboard
Benjamin-girard-1
193 × 110 mm297 parts2LNo license0USB-A-to-USBC-C-adapter
TomasD-git
36.1 × 15.8 mm23 parts4LNo license0ESP32
Digital test board
Benjamin-girard-1
193 × 110 mm254 parts4LNo license0
How designs wire the HD3SS3220RNHR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the HD3SS3220RNHR connects to, and the resistors, capacitors and other passives placed on it.
- The ENN_CC pin is tied to GND on 6 of 7 designs.
- The VDD5 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
- The CURRENT_MODE pin is left unconnected on 5 of 7 designs.
- The ENN_MUX pin is tied to GND on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CURRENT_MODEpin 3 | Connected to: Not connected 71% | — |
| VCC33pin 8 | Connected to: 3.3V 71% · a signal 29% |
|
| DIRpin 11 | Connected to: Signal 86% |
|
| ENN_MUXpin 12 | Connected to: GND 71% · a signal 29% | — |
| GNDpin 13, 28 | Connected to: GND 100% | — |
| TX1Npin 16 | Connected to: A connector 29% |
|
| TX1Ppin 17 | Connected to: A connector 29% |
|
| TX2Npin 20 | Connected to: A connector 29% |
|
| TX2Ppin 21 | Connected to: A connector 29% |
|
| INT_N/OUT3pin 23 | Connected to: Not connected 71% · a signal 29% | — |
| VCONN_FAULT_Npin 24 | Connected to: Not connected 71% · a signal 29% | — |
| SDA/OUT1pin 25 | Connected to: Not connected 71% · a signal 29% | — |
| SCL/OUT2pin 26 | Connected to: Not connected 71% · a signal 29% | — |
| ENN_CCpin 29 | Connected to: GND 86% | — |
| VDD5pin 30 | Connected to: 5V 86% |
|
| EPpin 31 | Connected to: GND 100% | — |
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dongle pro by fcjr, CoolUsbHub by duykhanh09103, Base board by GeniePod and Slate113-mk1 by xeno3dev.
The HD3SS3220RNHR in open source designs
The gallery holds 8 open source boards using the HD3SS3220RNHR from 7 GitHub repositories; a typical one measures about 93.3 × 94 mm and carries around 235 components.
88% use four copper layers or more, and 38% carry an open source license.
The most starred is Dongle pro by fcjr.
Parts used alongside the HD3SS3220RNHR
Microcontrollers on boards using the HD3SS3220RNHR
What boards using the HD3SS3220RNHR are built for
HD3SS3220RNHR: common questions
Where can I find a HD3SS3220RNHR reference design?
Each of the 8 boards on this page is a real design using the HD3SS3220RNHR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the HD3SS3220RNHR ENN_CC pin connected?
The ENN_CC pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the HD3SS3220RNHR.
What decoupling capacitors do designs use on the HD3SS3220RNHR VDD5 pin?
The VDD5 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the HD3SS3220RNHR.
How is the HD3SS3220RNHR CURRENT_MODE pin connected?
The CURRENT_MODE pin is left unconnected on 5 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the HD3SS3220RNHR.
Which microcontrollers do boards using the HD3SS3220RNHR use?
Most are built on ESP32 (3).
How big is a typical board using the HD3SS3220RNHR?
The median is 93.3 × 94 mm, and 13% are two-layer designs.
What is the most popular open source board using the HD3SS3220RNHR?
By GitHub stars, Dongle pro by fcjr, with 16 stars.
Can I simulate one of these boards using the HD3SS3220RNHR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.