2 open source boards using the INA180A1IDBVT
Real designs built with the INA180A1IDBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Silicon LabsVideo signal booster board
timvideos
40 × 41.5 mm128 parts4LApache-2.03
RF80 V1R1 - STANDARD JLCPCB EVALUATION CANDIDATE
DD1SB
150 × 110 mm199 parts2LMIT0
The INA180A1IDBVT in open source designs
The gallery holds 2 open source boards using the INA180A1IDBVT from 2 GitHub repositories; a typical one measures about 95 × 75.8 mm and carries around 164 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Video signal booster board by timvideos.
Microcontrollers on boards using the INA180A1IDBVT
INA180A1IDBVT: common questions
Where can I find a INA180A1IDBVT reference design?
Each of the 2 boards on this page is a real design using the INA180A1IDBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA180A1IDBVT use?
Most are built on Silicon Labs (1).
How big is a typical board using the INA180A1IDBVT?
The median is 95 × 75.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA180A1IDBVT?
By GitHub stars, Video signal booster board by timvideos, with 3 stars.
Can I simulate one of these boards using the INA180A1IDBVT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.