3 open source boards using the IP2721_MAX12
Real designs built with the IP2721_MAX12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
QPocketPCR Main
GaudiLabs
82.5 × 140 mm96 parts2LGPL-3.021Raspberry Pi
PicoWFanController
rmpel
37.5 × 150 mm45 parts2LCustom license0ESP32
QCamPCR
GaudiLabs
82.5 × 140 mm95 parts2LGPL-3.021
The IP2721_MAX12 in open source designs
The gallery holds 3 open source boards using the IP2721_MAX12 from 2 GitHub repositories; a typical one measures about 82.5 × 140 mm and carries around 95 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is QPocketPCR Main by GaudiLabs.
Microcontrollers on boards using the IP2721_MAX12
IP2721_MAX12: common questions
Where can I find a IP2721_MAX12 reference design?
Each of the 3 boards on this page is a real design using the IP2721_MAX12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the IP2721_MAX12 use?
Most are built on ESP32 (2) and Raspberry Pi (1).
How big is a typical board using the IP2721_MAX12?
The median is 82.5 × 140 mm, and 100% are two-layer designs.
What is the most popular open source board using the IP2721_MAX12?
By GitHub stars, QPocketPCR Main by GaudiLabs, with 21 stars.
Can I simulate one of these boards using the IP2721_MAX12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.