10 open source boards using the IRLML6344TRPBF
Real designs built with the IRLML6344TRPBF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Safety board
UCLA-Bruin-Supermileage
186.6 × 107.9 mm76 parts2LNo license1McNulty Pad
cookiemonsternz
440 × 137.3 mm417 parts2LNo license0Microchip SAM
Samd51 gps alarm clock
KrHaaland
80 × 50 mm149 parts2LNo license0Omarich EPS stack V1.5
AfriOrbit
80.6 × 80.5 mm75 parts2LNo license0Flight computer
Purdue-Space-Program
78 × 67 mm102 parts4LNo license2Microchip SAM
GNSS Alarm Clock
KrHaaland
80 × 50 mm146 parts4LNo license0EPSV4
AfriOrbit
80.5 × 80.5 mm56 parts2LNo license0AVR/Arduino
Omarichet Sensor Shield 2
AfriOrbit
86.8 × 57.5 mm38 parts2LNo license0Omarichet Sensor Shield 1.2
AfriOrbit
100 × 100 mm33 parts2LNo license0Pyro
Purdue-Space-Program
34.5 × 32.3 mm15 parts2LNo license2
How designs wire the IRLML6344TRPBF
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the IRLML6344TRPBF connects to, and the resistors, capacitors and other passives placed on it.
- The S pin is tied to GND on 4 of 5 designs.
- The G pin has a series resistor on 3 of 5 designs, most often 100 Ω (then 1.5 kΩ).
- The G pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ (then 1 kΩ).
- The D pin has a series resistor on 3 of 5 designs, most often 680 Ω (then 4 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Gpin 1 | Connected to: A connector 40% |
|
| Spin 2 | Connected to: GND 80% · a signal 20% | — |
| Dpin 3 | Connected to: A connector 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flight computer by Purdue-Space-Program, Safety board by UCLA-Bruin-Supermileage, EPSV4 by AfriOrbit and McNulty Pad by cookiemonsternz.
The IRLML6344TRPBF in open source designs
The gallery holds 10 open source boards using the IRLML6344TRPBF from 5 GitHub repositories; a typical one measures about 80.5 × 73.8 mm and carries around 76 components.
80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Flight computer by Purdue-Space-Program.
Microcontrollers on boards using the IRLML6344TRPBF
What boards using the IRLML6344TRPBF are built for
IRLML6344TRPBF: common questions
Where can I find a IRLML6344TRPBF reference design?
Each of the 10 boards on this page is a real design using the IRLML6344TRPBF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the IRLML6344TRPBF S pin connected?
The S pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the IRLML6344TRPBF.
What resistor goes on the IRLML6344TRPBF G pin?
The G pin has a series resistor on 3 of 5 designs, most often 100 Ω (then 1.5 kΩ). Counted from the KiCad layouts of 5 open source designs using the IRLML6344TRPBF.
What resistor goes on the IRLML6344TRPBF D pin?
The D pin has a series resistor on 3 of 5 designs, most often 680 Ω (then 4 kΩ). Counted from the KiCad layouts of 5 open source designs using the IRLML6344TRPBF.
Which microcontrollers do boards using the IRLML6344TRPBF use?
Most are built on Microchip SAM (2), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the IRLML6344TRPBF?
The median is 80.5 × 73.8 mm, and 80% are two-layer designs.
What is the most popular open source board using the IRLML6344TRPBF?
By GitHub stars, Flight computer by Purdue-Space-Program, with 2 stars.
Can I simulate one of these boards using the IRLML6344TRPBF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.