3 open source boards using the ISO1541DR

Real designs built with the ISO1541DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ISO1541DR in open source designs

The gallery holds 3 open source boards using the ISO1541DR from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 225 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Motherboard by ParadigmHyperloop.

Microcontrollers on boards using the ISO1541DR

What boards using the ISO1541DR are built for

ISO1541DR: common questions

Where can I find a ISO1541DR reference design?

Each of the 3 boards on this page is a real design using the ISO1541DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ISO1541DR use?

Most are built on AVR/Arduino (1) and STM32 (1).

How big is a typical board using the ISO1541DR?

The median is 100 × 100 mm, and 33% are two-layer designs.

What is the most popular open source board using the ISO1541DR?

By GitHub stars, Motherboard by ParadigmHyperloop, with 11 stars.

Can I simulate one of these boards using the ISO1541DR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part