8 open source boards using the kb2040

Real designs built with the kb2040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the kb2040

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the kb2040 connects to, and the resistors, capacitors and other passives placed on it.

  • The D+ pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The RESET pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The 3.3V pin is tied to VCC on 4 of 6 designs (a signal on 2).
  • The A1/27 pin is left unconnected on 3 of 5 designs (a signal on 2).
D+pin 1Connected to: Not connected 67% · a signal 33%
GNDpin 4, 5, 16Connected to: GND 89%
D2pin 6Connected to: A connector 83%
  • Pull-up to VCC on 33% · 2.2 kΩ (2)
D3pin 7Connected to: A connector 83%
  • Pull-up to VCC on 33% · 2.2 kΩ (2)
RESETpin 17Connected to: Not connected 67% · a signal 33%
3.3Vpin 18Connected to: VCC 67% · a signal 33%
A3/29pin 19Connected to: A connector 33% · not connected 33%
  • Series resistor on 33% · 4.7 kΩ (1), 100 kΩ (1)
A1/27pin 21Connected to: Not connected 60% · a signal 40%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LC PAMV4b by WMXZ-EU, Eurorack Dexy Module by Len42, Custom keyboard by eastmohan and Sofle nest by fishjord.

The kb2040 in open source designs

The gallery holds 8 open source boards using the kb2040 from 7 GitHub repositories; a typical one measures about 143.4 × 110 mm and carries around 90 components.

88% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is LC PAMV4b by WMXZ-EU.

Microcontrollers on boards using the kb2040

kb2040: common questions

Where can I find a kb2040 reference design?

Each of the 8 boards on this page is a real design using the kb2040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the kb2040 D+ pin connected?

The D+ pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the kb2040.

How is the kb2040 RESET pin connected?

The RESET pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the kb2040.

How is the kb2040 3.3V pin connected?

The 3.3V pin is tied to VCC on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the kb2040.

Which microcontrollers do boards using the kb2040 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the kb2040?

The median is 143.4 × 110 mm, and 88% are two-layer designs.

What is the most popular open source board using the kb2040?

By GitHub stars, LC PAMV4b by WMXZ-EU, with 8 stars.

Can I simulate one of these boards using the kb2040 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part