7 open source boards using the L7915
Real designs built with the L7915, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Asteroids
nmikstas
290.8 × 482.6 mm490 parts2LNo license23PI wt hold for laser intensity lock
JQIamo
62.8 × 172 mm124 parts4LNo license1Stereo Preamplifier
PeraZver
83 × 54 mm51 parts2LNo license7Auxiliary board - DJ filter FX unit
yminp
148.6 × 82 mm134 parts2LCERN-OHL-W-2.00Solstrejf PSU & Stereo Mixer
KamikazeVildsvin
114.9 × 54 mm39 parts2LGPL-3.01Smu pwr 1
jaromir-sukuba
100 × 82 mm38 parts2LNo license188DelSol PSU
dzavalishin
122.6 × 50.8 mm61 parts2LNo license3
How designs wire the L7915
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the L7915 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a capacitor to GND on 7 of 7 designs, most often 470 µF (then 1 mF).
- The VO pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 220 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: A connector 29% |
|
| VOpin 3 | Connected to: -15V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smu pwr 1 by jaromir-sukuba, Asteroids PCB by nmikstas, Stereo Preamplifier by PeraZver and DelSol PSU by dzavalishin.
The L7915 in open source designs
The gallery holds 7 open source boards using the L7915 from 7 GitHub repositories; a typical one measures about 114.9 × 82 mm and carries around 61 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Smu pwr 1 by jaromir-sukuba.
What boards using the L7915 are built for
L7915: common questions
Where can I find a L7915 reference design?
Each of the 7 boards on this page is a real design using the L7915. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L7915 VI pin connected?
The VI pin has a capacitor to GND on 7 of 7 designs, most often 470 µF (then 1 mF). Counted from the KiCad layouts of 7 open source designs using the L7915.
What decoupling capacitors do designs use on the L7915 VO pin?
The VO pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 220 µF). Counted from the KiCad layouts of 7 open source designs using the L7915.
How big is a typical board using the L7915?
The median is 114.9 × 82 mm, and 86% are two-layer designs.
What is the most popular open source board using the L7915?
By GitHub stars, Smu pwr 1 by jaromir-sukuba, with 188 stars.
Can I simulate one of these boards using the L7915 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.