9 open source boards using the LDL1117S50R
Real designs built with the LDL1117S50R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Bkm-129x scart vga
skumlos
105 × 160 mm67 parts2LNo license15RP2040/RP2350
Safety board
UCLA-Bruin-Supermileage
186.6 × 107.9 mm76 parts2LNo license1AVR/Arduino
MCU.ATMEGA328P-AU-Base
kgsully
60 × 63 mm51 parts2LNo license1MotorControllerBoardV2
Didsbury-Diddlers-Co-Est-2006
100 × 100 mm46 parts4LNo license1STM32
Impeller18
buglalis
236.1 × 156.9 mm750 parts4LNo license0PIC
Battery can monitor
mbouyer
82 × 102 mm67 parts2LBSD-2-Clause0Battery-Protected-Multi-Rail-Regulator
dineshkiran97
65 × 40 mm12 parts2LMIT0Daughter
ept221
76.2 × 38.1 mm42 parts2LMIT12MotorControllerBoardV2.PCREV1
Didsbury-Diddlers-Co-Est-2006
102 × 102 mm46 parts4LNo license1
How designs wire the LDL1117S50R
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LDL1117S50R connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 220 µF).
- The VOUT pins have a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 220 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 89% | — |
| VOUTpin 2, 4 | Connected to: 5V 64% · a signal 36% |
|
| VINpin 3 | Connected to: 12V 56% · a signal 44% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bkm-129x scart vga by skumlos, Daughter by ept221, MotorControllerBoardV2 by Didsbury-Diddlers-Co-Est-2006 and MCU.ATMEGA328P-AU-Base by kgsully.
The LDL1117S50R in open source designs
The gallery holds 9 open source boards using the LDL1117S50R from 8 GitHub repositories; a typical one measures about 100 × 102 mm and carries around 51 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Bkm-129x scart vga by skumlos.
Parts used alongside the LDL1117S50R
Microcontrollers on boards using the LDL1117S50R
What boards using the LDL1117S50R are built for
LDL1117S50R: common questions
Where can I find a LDL1117S50R reference design?
Each of the 9 boards on this page is a real design using the LDL1117S50R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LDL1117S50R VIN pin?
The VIN pin has a decoupling capacitor on 8 of 8 designs, most often 1 µF (then 220 µF). Counted from the KiCad layouts of 8 open source designs using the LDL1117S50R.
What decoupling capacitors do designs use on the LDL1117S50R VOUT pin?
The VOUT pins have a decoupling capacitor on 6 of 8 designs, most often 1 µF (then 220 µF). Counted from the KiCad layouts of 8 open source designs using the LDL1117S50R.
Which microcontrollers do boards using the LDL1117S50R use?
Most are built on AVR/Arduino (2), PIC (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the LDL1117S50R?
The median is 100 × 102 mm, and 67% are two-layer designs.
What is the most popular open source board using the LDL1117S50R?
By GitHub stars, Bkm-129x scart vga by skumlos, with 15 stars.
Can I simulate one of these boards using the LDL1117S50R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.