2 open source boards using the LDO 3.3V 500mA SOT23-5

Real designs built with the LDO 3.3V 500mA SOT23-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LDO 3.3V 500mA SOT23-5 in open source designs

The gallery holds 2 open source boards using the LDO 3.3V 500mA SOT23-5 from 2 GitHub repositories; a typical one measures about 55 × 21.6 mm and carries around 76 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Pocket sdr v2.3 by tomojitakasu.

Parts used alongside the LDO 3.3V 500mA SOT23-5

What boards using the LDO 3.3V 500mA SOT23-5 are built for

RF & radio 2

LDO 3.3V 500mA SOT23-5: common questions

Where can I find a LDO 3.3V 500mA SOT23-5 reference design?

Each of the 2 boards on this page is a real design using the LDO 3.3V 500mA SOT23-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LDO 3.3V 500mA SOT23-5?

The AT24C128C, CY7C68013A-56LTXCT and MAX2771 appear in the most repositories here.

How big is a typical board using the LDO 3.3V 500mA SOT23-5?

The median is 55 × 21.6 mm, and 0% are two-layer designs.

What is the most popular open source board using the LDO 3.3V 500mA SOT23-5?

By GitHub stars, Pocket sdr v2.3 by tomojitakasu, with 526 stars.

Can I simulate one of these boards using the LDO 3.3V 500mA SOT23-5 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.