3 open source boards using the AT24C128C

Real designs built with the AT24C128C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The AT24C128C in open source designs

The gallery holds 3 open source boards using the AT24C128C from 3 GitHub repositories; a typical one measures about 55 × 21.6 mm and carries around 76 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is Pocket sdr v2.3 by tomojitakasu.

Microcontrollers on boards using the AT24C128C

What boards using the AT24C128C are built for

AT24C128C: common questions

Where can I find a AT24C128C reference design?

Each of the 3 boards on this page is a real design using the AT24C128C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AT24C128C?

The CY7C68013A-56LTXCT, LDO 3.3V 500mA SOT23-5 and MAX2771 appear in the most repositories here.

Which microcontrollers do boards using the AT24C128C use?

Most are built on STM32 (1).

How big is a typical board using the AT24C128C?

The median is 55 × 21.6 mm, and 33% are two-layer designs.

What is the most popular open source board using the AT24C128C?

By GitHub stars, Pocket sdr v2.3 by tomojitakasu, with 526 stars.

Can I simulate one of these boards using the AT24C128C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part