2 open source boards using the LF33ABDT-TR

Real designs built with the LF33ABDT-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LF33ABDT-TR in open source designs

The gallery holds 2 open source boards using the LF33ABDT-TR from 2 GitHub repositories; a typical one measures about 79.5 × 69.1 mm and carries around 39 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MCopter by UnTraDe.

Microcontrollers on boards using the LF33ABDT-TR

What boards using the LF33ABDT-TR are built for

LF33ABDT-TR: common questions

Where can I find a LF33ABDT-TR reference design?

Each of the 2 boards on this page is a real design using the LF33ABDT-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LF33ABDT-TR use?

Most are built on STM32 (1).

How big is a typical board using the LF33ABDT-TR?

The median is 79.5 × 69.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the LF33ABDT-TR?

By GitHub stars, MCopter by UnTraDe, with 5 stars.

Can I simulate one of these boards using the LF33ABDT-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part