2 open source boards using the LM1086-3.3
Real designs built with the LM1086-3.3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
L-Star
jacgoudsmit
99.7 × 80 mm51 parts2LMIT57- schematic only · 33 partsRP2040/RP2350
Pico pilot
DusterTheFirst
33 partsGPL-3.01
The LM1086-3.3 in open source designs
The gallery holds 2 open source boards using the LM1086-3.3 from 2 GitHub repositories; a typical one measures about 99.7 × 80 mm and carries around 42 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is L-Star by jacgoudsmit.
Microcontrollers on boards using the LM1086-3.3
What boards using the LM1086-3.3 are built for
LM1086-3.3: common questions
Where can I find a LM1086-3.3 reference design?
Each of the 2 boards on this page is a real design using the LM1086-3.3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM1086-3.3 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the LM1086-3.3?
The median is 99.7 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM1086-3.3?
By GitHub stars, L-Star by jacgoudsmit, with 57 stars.
Can I simulate one of these boards using the LM1086-3.3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.