3 open source boards using the LM1117SX-5.0_NOPB

Real designs built with the LM1117SX-5.0_NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM1117SX-5.0_NOPB in open source designs

The gallery holds 3 open source boards using the LM1117SX-5.0_NOPB from 2 GitHub repositories; a typical one measures about 206.4 × 121.9 mm and carries around 69 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is ETH1CLCR2 by BehrensG.

Microcontrollers on boards using the LM1117SX-5.0_NOPB

What boards using the LM1117SX-5.0_NOPB are built for

Power & battery 2

LM1117SX-5.0_NOPB: common questions

Where can I find a LM1117SX-5.0_NOPB reference design?

Each of the 3 boards on this page is a real design using the LM1117SX-5.0_NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM1117SX-5.0_NOPB use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the LM1117SX-5.0_NOPB?

The median is 206.4 × 121.9 mm, and 67% are two-layer designs.

What is the most popular open source board using the LM1117SX-5.0_NOPB?

By GitHub stars, ETH1CLCR2 by BehrensG, with 0 stars.

Can I simulate one of these boards using the LM1117SX-5.0_NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.