7 open source boards using the LM317L_SOT-89
Real designs built with the LM317L_SOT-89, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Dual cam
strawlab
76 × 51 mm46 parts2LNo license3LEGO® Technic (TM) Large Hub Battery: 45610 | Charger
Ekips-Prime-Pro
19 × 23.5 mm9 parts2LApache-2.01AVR/Arduino
KapTesterV2
Lancarr8
90 × 70 mm41 parts2LNo license0First half
bchethan24
131 × 78 mm23 parts2LMIT0Charger for LEGO® Technic (TM) Large Hub Battery: 45610
Ekips-Prime-Pro
27.5 × 35.3 mm9 parts2LApache-2.01Lab
pisulamayan1999
62.1 × 34 mm13 parts2LNo license0Variable pwr supply circuit
AbhishekGM23
42 × 19 mm15 parts2LNo license0
How designs wire the LM317L_SOT-89
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LM317L_SOT-89 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a capacitor to GND on 4 of 6 designs, most often 1 µF (then 100 µF).
- The VI pin has a capacitor to GND on 4 of 6 designs, most often 470 nF (then 2.2 mF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADJpin 1 | Connected to: Signal 100% |
|
| VOpin 2 | Connected to: Signal 83% · 12V 17% |
|
| VIpin 3 | Connected to: Signal 67% · VDD 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dual cam pcb by strawlab, LEGO® Technic (TM) Large Hub Battery: 45610 | Charger by Ekips-Prime-Pro, Variable pwr supply circuit by AbhishekGM23 and First half pcb by bchethan24.
The LM317L_SOT-89 in open source designs
The gallery holds 7 open source boards using the LM317L_SOT-89 from 6 GitHub repositories; a typical one measures about 62.1 × 35.3 mm and carries around 15 components.
100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Dual cam pcb by strawlab.
Parts used alongside the LM317L_SOT-89
Microcontrollers on boards using the LM317L_SOT-89
What boards using the LM317L_SOT-89 are built for
LM317L_SOT-89: common questions
Where can I find a LM317L_SOT-89 reference design?
Each of the 7 boards on this page is a real design using the LM317L_SOT-89. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM317L_SOT-89 VO pin connected?
The VO pin has a capacitor to GND on 4 of 6 designs, most often 1 µF (then 100 µF). Counted from the KiCad layouts of 6 open source designs using the LM317L_SOT-89.
How is the LM317L_SOT-89 VI pin connected?
The VI pin has a capacitor to GND on 4 of 6 designs, most often 470 nF (then 2.2 mF). Counted from the KiCad layouts of 6 open source designs using the LM317L_SOT-89.
Which microcontrollers do boards using the LM317L_SOT-89 use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the LM317L_SOT-89?
The median is 62.1 × 35.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM317L_SOT-89?
By GitHub stars, Dual cam pcb by strawlab, with 3 stars.
Can I simulate one of these boards using the LM317L_SOT-89 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.