7 open source boards using the LM334M

Real designs built with the LM334M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LM334M

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LM334M connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 6 of 6 designs, most often 1.33 kΩ (then 13.3 kΩ).
  • Pin 3 has a series resistor on 4 of 6 designs, most often 100 Ω (then 11 kΩ).
  • Pin 6 has a series resistor on 4 of 6 designs, most often 1 kΩ (then 11 kΩ).
  • Pin 2 has a series resistor on 3 of 6 designs, most often 11 kΩ (then 130 Ω).
Pin 1Connected to: Signal 100%
  • Series resistor on 100% · 1.33 kΩ (2), 13.3 kΩ (2), 100 Ω (1)
Pin 2Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 11 kΩ (1), 130 Ω (1), 22 Ω (1)
Pin 3Connected to: Signal 83% · not connected 17%
  • Series resistor on 67% · 100 Ω (1), 11 kΩ (1), 130 Ω (1)
Pin 4Connected to: 12V 50% · a signal 50%
  • Capacitor to GND on 50% · 100 nF (3), 22 µF (1), 10 µF (1)
  • Series resistor on 33% · 1 kΩ (2), 10 kΩ (2), 150 kΩ (1)
NCpin 5, 8Connected to: Not connected 100%
Pin 6Connected to: Signal 83% · not connected 17%
  • Series resistor on 67% · 1 kΩ (1), 11 kΩ (1), 130 Ω (1)
Pin 7Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 11 kΩ (1), 130 Ω (1), 22 Ω (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PSU PCB by ThomasVDD, Current dr psu by werediver, BIRDS-X-PCB by AlbertaSat and Black Body Temperature Sensor PCB by DylanLockyer.

The LM334M in open source designs

The gallery holds 7 open source boards using the LM334M from 7 GitHub repositories; a typical one measures about 69.1 × 79 mm and carries around 79 components.

67% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is PSU PCB by ThomasVDD.

Microcontrollers on boards using the LM334M

LM334M: common questions

Where can I find a LM334M reference design?

Each of the 7 boards on this page is a real design using the LM334M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LM334M pin 1?

Pin 1 has a series resistor on 6 of 6 designs, most often 1.33 kΩ (then 13.3 kΩ). Counted from the KiCad layouts of 6 open source designs using the LM334M.

What resistor goes on the LM334M pin 3?

Pin 3 has a series resistor on 4 of 6 designs, most often 100 Ω (then 11 kΩ). Counted from the KiCad layouts of 6 open source designs using the LM334M.

What resistor goes on the LM334M pin 6?

Pin 6 has a series resistor on 4 of 6 designs, most often 1 kΩ (then 11 kΩ). Counted from the KiCad layouts of 6 open source designs using the LM334M.

Which microcontrollers do boards using the LM334M use?

Most are built on STM32 (2) and AVR/Arduino (1).

How big is a typical board using the LM334M?

The median is 69.1 × 79 mm, and 67% are two-layer designs.

What is the most popular open source board using the LM334M?

By GitHub stars, PSU PCB by ThomasVDD, with 16 stars.

Can I simulate one of these boards using the LM334M before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part