11 open source boards using the LM339BDR
Real designs built with the LM339BDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
After
DD1SB
180 × 140 mm287 parts2LMIT0ESP32
Lune
Birkemosen
120 × 75 mm128 parts4LCC-BY-NC-4.00Before
DD1SB
180 × 140 mm287 parts2LMIT0Dfm-2oz
DD1SB
180 × 140 mm287 parts2LMIT0Dfm special finish
DD1SB
180 × 140 mm287 parts2LMIT0E2-native
DD1SB
180 × 140 mm287 parts2LMIT0E4-native
DD1SB
180 × 140 mm287 parts2LMIT0E4R1-baseline
DD1SB
180 × 140 mm287 parts2LMIT0RF2M
DD1SB
150 × 110 mm287 parts2LMIT0Sliver only
DD1SB
180 × 140 mm287 parts2LMIT0Strict before
DD1SB
180 × 140 mm287 parts2LMIT0
The LM339BDR in open source designs
The gallery holds 11 open source boards using the LM339BDR from 2 GitHub repositories; a typical one measures about 180 × 140 mm and carries around 287 components.
91% are two-layer designs, the rest use four layers or more, and 91% carry an open source license.
The most starred is RF2M by DD1SB.
Parts used alongside the LM339BDR
Microcontrollers on boards using the LM339BDR
What boards using the LM339BDR are built for
LM339BDR: common questions
Where can I find a LM339BDR reference design?
Each of the 11 boards on this page is a real design using the LM339BDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM339BDR use?
Most are built on ESP32 (1).
How big is a typical board using the LM339BDR?
The median is 180 × 140 mm, and 91% are two-layer designs.
What is the most popular open source board using the LM339BDR?
By GitHub stars, RF2M by DD1SB, with 0 stars.
Can I simulate one of these boards using the LM339BDR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.